Laser drilling machine

 

 

   Without touching the workpiece, the laser beam produces holes – from ultrasmall to relatively large - in different materials.

 

Flexibility of Laser drilling

 

   Lasers drilling make it possible to machine very small, blind, unusually shaped and precisely tapered holes. They can drill holes at steep angles and process difficult-to-machine materials. A single set-up can produce hundreds of different sizes over a 3D surface.

 

Laser Drilling machine features

 

• Laser Drilling process is non-contact process (no tooling wear or breakage, minimal material distortion).
• Laser Drilling process is highly accurate and consistent results.
• Laser Drilling has ability to produce small diameter holes with high aspect ratios.
• Precise control of heat input.
• Visible ‘Pilot’ beam shows the laser marking location for fast, accurate setup.
• Ease of programming and adaptability to automation.
• One of the prime advantage of laser marking is that it can be automized and can be integrated with any online process.
• Increased production rates with faster setup times and less tooling.
• Laser Drilling process has capability of some laser systems to drill multiple features simultaneously.

 

Use of Laser Drilling

 

• Laser driling holes in the 25µm to 1000µm diameter range is possible using this method but the limits vary according to the material. Most laser drilled holes are in the 300µm-600µm diameter range..
• Laser drilling allows a special drilling regime termed drilling 'on-the-fly' to greatly increase hole drilling speed.Laser Drilling on the fly is usually performed on round turbine engine parts and uses signals from the motion systems encoders to trigger the laser at specific, consistently-spaced hole locations around the part.
• Laser drilling can take advantage of pulse-shaping to improve the interaction of the laser beam with the material. This can also help control taper and improve the drilling speed.

 

LIPI - Laser Drilling Software

 

    Among its many features are ease-of-use, high performance, flexibility, and low cost that give you the best laser marking software on the market today. LIPI software is developed by our highly skilled professionals developers.Features of LIPI are...

 

Technical Specification

 

Laser Type	Fiber Laser
Laser	Fiber Laser,Diode Pump, Nd:YAG Laser
Average /CW Output Power	20 W
Pulse Repetition Rate	20-80 KHz
Wavelength	1062 ± 3 nm
Laser Class	IV
Guide Laser/Red Aiming Beam	Yes
Ambient Temperature	25 °C
Power Consumption	< 1 kW
Electrical Connection (Optional)	230v/50Hz - 115V/60Hz
Marking area (Optional)	Ø100/150/220mm
Repeatability	50Micron
Resolution	18Micron
Marking Speed	Up to 10000 mm/sec*

 

  Keyword:  laser drilling,laser drilling machine, vision embesoft solution, ahmedabad, gujarat, india

Click here to view full image